Install Zeroshell-2.0.RC2 on the hard disk
1. First download the image from the official site ZeroShell-2.0.RC2.iso. Also Download ZeroShell-2.0.RC2-IDE-USB-SATA-2GB.img.gz
2. Open ISO image with magiciso and move to USR directory. Put zeroshell.x.x.x.img.gz in USR and save it.
3. Write ISO image to the cd
4. Boot system from that zeroshell CD and let it start
5. Press S, to go to the command mode.
6. Run the command fdisk-L, to view the available devices (hard disk)
7. Now unpack. Img.gz image to your hard drive by performing commands:
cd /usr
gunzip -c zeroshell-2.0.RC2.img.gz > /dev/sda
Wait for the image decompression
8. Reboot the system by performing the command:
reboot
Remove the CD and system will boot from the hard drive.
Set your lan ip to 192.168.0.10/255.255.255.0 and gateway to 192.168.0.75
open web interface of ZeroShell using https://192.168.0.75
User: admin
Password: zeroshell
1. First download the image from the official site ZeroShell-2.0.RC2.iso. Also Download ZeroShell-2.0.RC2-IDE-USB-SATA-2GB.img.gz
2. Open ISO image with magiciso and move to USR directory. Put zeroshell.x.x.x.img.gz in USR and save it.
3. Write ISO image to the cd
4. Boot system from that zeroshell CD and let it start
5. Press S, to go to the command mode.
6. Run the command fdisk-L, to view the available devices (hard disk)
7. Now unpack. Img.gz image to your hard drive by performing commands:
cd /usr
gunzip -c zeroshell-2.0.RC2.img.gz > /dev/sda
Wait for the image decompression
8. Reboot the system by performing the command:
reboot
Remove the CD and system will boot from the hard drive.
Set your lan ip to 192.168.0.10/255.255.255.0 and gateway to 192.168.0.75
open web interface of ZeroShell using https://192.168.0.75
User: admin
Password: zeroshell